[논문]
전용호, 정창호, 홍민성,
AISI 4140 시편의 미세단조 공정 충격력 및 표면 변형량 측정
, 한국생산제조학회지
, Vol.27
, No.5
, pp.466
-471
(Oct, 2018)
[논문]
홍민성, 장광수,
압축천연가스(CNG) 내압용기 결함에 따른 안전성 평가
, 한국생산제조학회지
, Vol.27
, No.5
, pp.430
-438
(Oct, 2018)
국제학술논문지
[논문]
이문구, 홍민성, 이낙규, 전용호, 강동우, 강유성, 이수훈,
Analytical study on web deformation by tension in roll-to-roll printing process
, IOP Conference Series: Materials Science and Engineering
, Vol.1
, No.227
, pp.012067
-012067
(Aug, 2017)
[논문]
이문구, 남성호, 이진우, 이원기, 홍민성, 전용호,
Failure Diagnosis System for a Ball-Screw by Using Vibration Signals
, SHOCK AND VIBRATION
, Vol.2015
, pp.1
-9
(Jun, 2015)
[논문]
홍민성, 김동원, 허은영, 김종민, 이철수,
Machinability features in micro die?sinking electrical discharge machining
, INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY
, Vol.48
, No.1~4
, pp.135
-145
(Feb, 2014)
[논문]
김노유, 홍민성,
Measurement of axial stress using mode-converted ultrasound
, NDT&E International
, Vol.42
, No.3
, pp.164
-169
(Apr, 2009)
[논문]
이문구, 정현수, 홍민성, 강동우, 박준호, 이수훈,
A novel stylus profiler without nonlinearity and parasitic motion for FPD inspection system
, Journal of Mechanical Science and Technology
, Vol.21
, pp.1491
-1497
(Oct, 2007)
[논문]
이문구, 김기현, 권대갑, 정현수, 이수훈, 홍민성,
A Stage Based on Voice Coil Motor with High Speed and Long Range for Laser Micro/Nano Fabrication
, Trans Tech Publications
, Vol.345-346
, No.1
, pp.757
-760
(Aug, 2007)
[논문]
홍민성, 김봉석, 김종민, 이수훈,
A Study on the Surface Characteristics with the Vibration Factor in the Micro-Machine
, Trans Tech Publicatons
, Vol.321-323
, No.2
, pp.1605
-1608
(Aug, 2006)
[논문]
홍민성, 김종민, 김노유,
A Study on the Measurement System using an Ultrasonic Sensor in Electron Beam Welding
, Trans Tech Publications
, Vol.321-323
, No.2
, pp.1715
-1718
(Aug, 2006)
[논문]
홍민성, 이철규, 김희준, 오세웅, Hozumi, N, 김노유,
Ultrasonic Measurement of Elastic Properties of Nanostructred Alumina
, Trans Tech Publications
, Vol.321-323
, No.2
, pp.1711
-1714
(Aug, 2006)
[논문]
홍민성, C.H.Chiou, E.F. Ehmann,
Instantaneous shear plane based cutting force model for end milling
, ELSEVIER
, Vol.170
, pp.164
-180
(Nov, 2005)
[논문]
홍민성, C-H Chiou, K.F. Ehmann,
Simulation of machined surface topography in end-milling processes using a shear-plane-based cutting force model
, J. Engineering Manufacture
, Vol.218
, pp.1767
-1793
(Dec, 2004)
[논문]
홍민성, 김노유,
Diagnosis and Reduction of Robot Arm Vibration for 12-inch Wafer Spin Scrubber
, Key Engineering Materials
, Vol.270-273
, pp.884
-889
(Aug, 2004)
[논문]
홍민성, C.H.Chiou, K.F.Ehmann,
The feasibility of eigenstructure assignment for machining chatter control
, International Journal of Machine Tools & Manufacture
, Vol.43
, No.15
, pp.1603
-1620
(Dec, 2003)
[논문]
홍민성, 염철만,
The Optimal Selection of Cutting Parameters in Turning Operation
, Transactions of NAMRI/SME
, Vol.29
, No.1
, pp.319
-325
(May, 2001)
[논문]
홍민성, K.F.Ehman,
Generation of Engineered Surfaces by the Surface-Shaping System
, International Journal of Machine Tools Manufacture
(Sep, 1995)
[논문]
홍민성, K.F.Ehman,
Three-Dimensional Surface Characterization by Two-dimansional Auto regressive Models
, Journal of Tribology
(Jul, 1995)
[논문]
홍민성, K.F.Ehman,
A Generalized Model of the Surface Generation Process in Metal Cutting
, Annals of the CIRP
(Aug, 1994)
국내학술논문지
[논문]
홍민성, 이형규, 박선재, 최병주,
가공 스테이지와 반사경 이동량을 결정하는 임계값이 LASER 가공오차에 미치는 영향에 관한 연구
, 한국생산제조학회지
, Vol.27
, No.6
, pp.479
-484
(Dec, 2018)
[논문]
전용호, 정창호, 홍민성,
AISI 4140 시편의 미세단조 공정 충격력 및 표면 변형량 측정
, 한국생산제조학회지
, Vol.27
, No.5
, pp.466
-471
(Oct, 2018)
[논문]
홍민성, 장광수,
압축천연가스(CNG) 내압용기 결함에 따른 안전성 평가
, 한국생산제조학회지
, Vol.27
, No.5
, pp.430
-438
(Oct, 2018)
[논문]
홍민성, 강유성, 박지형, 전용호,
Self-Piercing Riveting을 이용한 알루미늄 합금과 Steel 강판의 다층 접합 연구
, 한국생산제조학회지
, Vol.27
, No.4
, pp.307
-316
(Aug, 2018)
[논문]
이철수, 최현우, 김종민, 홍민성,
Temperature Prediction Model for Laser Polishing on Aluminum and a Measurement of Polishing Effect
, 한국생산제조학회지
, Vol.27
, No.4
, pp.317
-328
(Aug, 2018)
[학술회의]
전용호, 배정훈, 최병주, 정창호, 이문구, 홍민성,
Tensile analysis of 3D printed carbon fiber reinforced plastic
, The 9th International Conference of Manufacturing Technology Engineers
(Oct, 2020)
[학술회의]
이문구, 윤효준, 이수훈, 전용호, 홍민성,
Finding the most efficient layout using Dmworks simulation
, 2018 ICMTE
(Oct, 2018)
[학술회의]
전용호, 이수훈, 홍민성, 정창호, 이문구,
FATIGUE EFFECT OF LASER-ASSIST HIGH FREQUENCY MICRO FORGING OF AISI 4140 STEEL
, ModTech International Conference 2017
(Jun, 2017)
[학술회의]
이문구, 조혁상, 홍민성, 전용호, 이수훈,
Performance Prediction of Piezoelectric Energy Harvesting Cantilever with Halbach Magnet Array
, ICMTE 2016
(Oct, 2016)
[학술회의]
전용호, 최병주, 이수훈, 홍민성, 이문구, 이광재,
Chemical Composition Analysis of Laser Cladding Cross Section
, 2016 International Conference on Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.126
-126
(Oct, 2016)
[학술회의]
이문구, 성은호, 이수훈, 강유성, 전용호, 홍민성,
Dynamic Analysis of Flexible Substrates for Roll to Roll Process
, ICMTE 2016
(Oct, 2016)
[학술회의]
이문구, 이수훈, 천두호, 최영만, 노현규, 전용호, 홍민성,
Design Optimization of Linear Resonant Actuator with Halbach Magnet Array
, ICMTE 2016
(Oct, 2016)
[학술회의]
이문구, 이수훈, 송정민, 심성환, 박두환, 최요환, 전용호, 홍민성,
Design of a Normal Stress Type Electromagnetic Actuator for Fast Tilting
, ICMTE 2016
(Oct, 2016)
[학술회의]
이문구, 염현호, 홍민성, 최병주, 전용호, 이수훈,
Application of Structural Damping for Drop Impact Analysis of Mobile Haptic Actuator
, ICMTE 2016
(Oct, 2016)
[학술회의]
이문구, 조재훈, 홍민성, 서창훈, 전용호, 이수훈,
Eddy Current Damper to Improve Positioning Capability for Air Bearing Guided Linear Motion System
, ICMTE 2016
(Oct, 2016)
[학술회의]
이문구, 박성룡, 홍민성, 전용호, 이수훈,
Configuration of ICT-based Flexible Automation Systems using DMWorks
, ICMTE 2016
(Oct, 2016)
[학술회의]
전용호, 정창호, 이수훈, 이문구, 홍민성,
Micro Structure ananlysis and Vikers Hardness Measurment for Primary Quality Test
, 2016 International Conference on Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.136
-136
(Oct, 2016)
[학술회의]
전용호, 정창호, 홍민성, 이문구, 이수훈,
Oscilloscopic Frequency and Displacement Measurement of TERFENOL-D with Various Tips
, ICMTE 2016
(Oct, 2016)
[학술회의]
이문구, 전용호, 박종권, 이수훈, 천두호, 한상훈, 홍민성,
Design of dynamic focusing unit to combine with 2D galvano-metor system
, 16th International Manufacturing Conference in China (IMCC 2015)
, Vol.1
, No.1
, pp.1466
-1451
(Oct, 2015)
[학술회의]
이문구, 홍민성, 서창훈,
Vibration characteristics of precision stage for laser drilling process
, 2014 International Conference of Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.23
-23
(Oct, 2014)
[학술회의]
전용호, 홍민성, 염현호, 이문구, 최병주,
Optimal design of micro forging mechanism for precise vibrating motion
, 2014 International Conference of Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.18
-18
(Oct, 2014)
[학술회의]
이문구, 서창훈, 이수훈, 홍민성, 전용호, 김정기, 한상훈,
Gain scheduling control for positioning system with VCM and LM guide
, 2014 International Conference of Manufacturing Technology Engineers
, Vol.1
, No.1
, pp.16
-16
(Oct, 2014)
[학술회의]
홍민성, 김노유, 전용호, 김정기,
Effect of Ultrasonic Vibration on Micro-EDM
, 2013 International Conference of Manufacturing Technology Engineers
(Oct, 2013)
[학술회의]
이문구, 전용호, 홍민성, 남성호, 이원기, 이진우,
Failure diagnosis system for a ball-screw using vibration signals
, 2013 International Conference of Manufacturing Technology Engineers
(Oct, 2013)
[학술회의]
전용호, 김우진, 이수훈, 홍민성, 이문구, 조성학,
Effects of ultrasonic vibration assisted laser drilling on various materials
, Int'l conference of manufacturing Technology engineers 2012
, Vol.1
, No.1
, pp.57
-57
(Oct, 2012)
[학술회의]
이문구, 전용호, 홍민성, 이찬우, 김우진,
Design of a VCM dynamic focusing unit for a laser scanning system
, 15th Int'l Conference on Advanced Materials & Processing Technologies
, Vol.1
, No.1
, pp.11691
-11696
(Sep, 2012)
[학술회의]
이문구, 홍민성, 전용호, Lu Fei, 김우진,
Optimal Design of PZT actuated Ultrasonic Vibration Mechanism based on Taguchi Method for Precision Laser Maching
, 12th international conference of the european society for precision engineering and nanotechnology
, Vol.1
, pp.431
-434
(Jun, 2012)
[학술회의]
이문구, 홍민성, 전용호, Yanlu, 이정재,
Workspace and Dexterity Optimization of 3-PRR Planar Parallel manipulator
, 12th international conference of the european society for precision engineering and nanotechnology
, Vol.1
, pp.360
-363
(Jun, 2012)
[학술회의]
김종민, 허은영, 홍민성, 이철수,
A Study on the Optimal Machining Condition of the Micro Hole in Micro-EDM Process
, FAIM2011
, Vol.1
, No.1
, pp.409
-414
(Jun, 2011)
[학술회의]
홍민성, 성연욱, 이혜진, 이문구,
Impact Analysis on Auto Focusing Actuator for Mobile Electronic Devices
, 11th International Conference fo the European Society for Precision Engineering and Nanotechnology
, Vol.2
, pp.269
-272
(May, 2011)
[학술회의]
홍민성, 이문구, 이철수, Sharavsambuu Battseren, 김종민,
Surface Characteristics of a Micro-channel by Hybrid Micro-EDM
, 11th International Conference fo the European Society for Precision Engineering and Nanotechnology
, Vol.2
, pp.200
-203
(May, 2011)
[학술회의]
이문구, 유용환, 이수훈, 송준엽, 홍민성, 이정재, 이창우,
Inverse Kinematics of Planar Parallel 3-PRP Manipulator for Micro-Components’Alignment
, 7th Int'l Workshop on Microfactory
, Vol.1
, pp.302
-307
(Oct, 2010)
[학술회의]
이문구, 홍민성, 정재화, 이수훈, 이지훈, 이정재,
Vibration and Noise Reduction Mechanism with Leaf Spring Module for Tredmill
, Euspen 2010
, Vol.2
, pp.107
-110
(Jun, 2010)
[학술회의]
이문구, 황동현, 정재화, 이지훈, 홍민성, 조성학, 김현욱, 김무종,
Ultrasonic Vibration Mechanism with PZT and Flexure Spring for Ultraprecision Laser Machining
, Euspen 2010
, Vol.1
, pp.320
-323
(May, 2010)
[학술회의]
홍민성, K.F. Ehmann, Kyungnam Kim, 이문구,
Cutting Dynamics in Diamond Turning
, The 3rd International Conference on Manufacturing, Machine Design and Tribology
, Vol.1
, No.1
, pp.292
-292
(Jun, 2009)
[학술회의]
이문구, 유용환, 이창우, 송준엽, 이수훈, 홍민성,
Design of Kinematic Analysis of 6-DOF Precision Aligner for Micro-Assembly
, Euspen 2009
, Vol.2
, No.1
, pp.479
-482
(Jun, 2009)
[학술회의]
이문구, 김진용, 송준엽, 이창우, 이수훈, 홍민성,
Design and Analysis of High Precision Linear Motor with Halbach Magnet Array for Micro Fabrication
, 6th International Workshop on Microfactories
, Vol.1
, No.1
, pp.238
-242
(Oct, 2008)
[학술회의]
이문구, 유용환, 송준엽, 이창우, 이수훈, 홍민성,
Design and Kinematic Analysis of 6-DOF Precision Aligner for Micro-Assembly
, 6th International Workshop on Microfactories
, Vol.1
, No.1
, pp.139
-142
(Oct, 2008)
[학술회의]
홍민성, Kyungnam Kim, K.F.Ehmann,
Prediction and characterization of the machined surface topography in the freqency domain
, The 2nd International Conference on Advanced Nondestructive Evaluation
, Vol.1
, No.1
, pp.224
-224
(Oct, 2007)
[학술회의]
이문구, 강동우, 이성민, 홍민성, 김노유,
Precision stage for stylus profiler with linear variable differential transformer as a position sensor
, ANDE2007
, Vol.1
, No.1
, pp.195
-195
(Oct, 2007)
[학술회의]
홍민성, 김종민, 김노유,
The expectation of surface roughness using ultrasound in a micro-machined channel
, ANDE2007
, Vol.1
, No.1
, pp.196
-196
(Oct, 2007)
[학술회의]
이문구, 박준호, 강동우, 정현수, 이수훈, 홍민성,
A novel stylus profiler without nonlinearity and parasitic motion for FPD inspection system
, 10th Advances in Materials and Processing Technologies
, Vol.1
, No.1
, pp.1092
-1100
(Oct, 2007)
[학술회의]
홍민성, 정현수, H.S. Yoon, K.F. Ehmann,
Modelling and Simulation of the Micro Milling Process
, Lamdamap 2007
, Vol.1
, No.1
, pp.299
-308
(Jun, 2007)
[학술회의]
이문구, 정현수, 권대갑, 김기현, 이수훈, 홍민성,
A STAGE BASED ON VOICE COIL MOTOR WITH HIGH SPEED AND LONG RANGE FOR LASER MICRO/NANO FABRICATION
, 10th International Conference on The Mechanical Behavior of Materials
, Vol.1
, pp.29
-29
(May, 2007)
[학술회의]
홍민성, 박현기, 김종민,
The Effect of Surface Roughness on the Fluidity in a Micro-machined Channel
, 5th International Workshop on Micro-factories
, Vol.1
, No.1
, pp.1
-5
(Oct, 2006)
[학술회의]
홍민성, 김봉석, 김종민, 이수훈,
A Study on the Surfave Chatacteristics with the Vibration Factors in Micro-machine
, The First Conference on Advanced Nondestructive Evaluation (ANDE2005)
, Vol.1
, No.1
, pp.319
(Nov, 2005)
[학술회의]
홍민성, 김종민, 김노뉴,
A Study on the Measurement System using Utrasound in Electron Beam Welding
, The First Conference on Advanced Nondestructive Evaluation (ANDE2005)
, Vol.1
, No.1
, pp.196
(Nov, 2005)
[학술회의]
홍민성, 김종민,
Optimal Conditions in Thin Plates Spot Welding
, International The First Conference on Manufacturing, Machine Design and Tribology
, Vol.1
, No.1
, pp.1
(Jun, 2005)
[학술회의]
홍민성, 김노유,
Evaluation of the optimal conditions in spot welding using ultrasonic technique
, 11th APCNDT 2003
, Vol.1
, No.1
, pp.279
(Nov, 2003)
[학술회의]
홍민성, 이주상, 김희남,
New Method of Dressing Time Monitoring Using Computer Simulation and Laser Beam in Surface Grinding
, The 1997 Joint ASME/ASCE/SES Summer Meeting
, Vol.1
, No.1
, pp.735
-735
(Jun, 1997)
[학술회의]
홍민성,
A Numerical Model for the Cutting Forces and Surface Topography in Face Milling Operations
, Inter. Workshop on Automotive Manufacturing Science and Technology
, pp.633
-639
(Jun, 1996)
[학술회의]
홍민성, K.F.Ehman,
Three-Dimensional Surface Characterization by Two Dimensional Autoregressive Models
, International Tribology Conference & Exhibition
(Oct, 1994)
[학술회의]
K.F.Ehman, C.J.Wang, 홍민성,
Surface Topography Control in Single-Point Cutting
, Proceedings of th First S.M. Wu Symposium on Manufactring Science
(May, 1994)
국내학술발표
[학술회의]
전용호, 한상원, 홍민성, 박정률, 이문구, 김세은,
전기차용 등속 조인트 개발을 위한 열 구조 연동 해석
, 한국생산제조학회 2022 추계학술대회
(Dec, 2022)
[학술회의]
전용호, 한상원, 박정률, 홍민성, 김세은,
FEM을 통한 전기차용 드라이브 샤프트 열 구조 연동 해석
, 한국기계가공학회 2022추계학술대회
(Dec, 2022)
[학술회의]
전용호, 김익수, 김세은, 홍민성, 이문구, 정창호,
용접 공정 간 자동 결함 검출을 위한 연구
, 한국생산제조학회 2022 춘계학술대회
(Jul, 2022)
[학술회의]
전용호, 홍민성, 김익수, 정창호, 유승하, 박기환, 이문구, 이수훈,
Google Colab을 이용한 객체 검출 알고리즘 비교
, 한국생산제조학회 2021년 추계학술대회
, pp.349
-349
(Dec, 2021)
[학술회의]
이문구, 홍민성, 민상화, 양재영, 손병언, 전용호, 이수훈,
회전력에 의한 스테이지 진동 특성 모델링 및 해석
, 한국생산제조학회 2021년 추계학술대회
, pp.177
-177
(Dec, 2021)
[학술회의]
이문구, 이수훈, 손병언, 김명인, 양재영, 민상화, 전용호, 홍민성,
설계 인자의 민감도분석을 통한 미세스테이지 최적 설계 및 유한요소해석 검증
, 한국생산제조학회 2021년 춘계학술대회
, pp.259
-259
(Jul, 2021)
[학술회의]
이문구, 박종권, 홍민성, 전용호, 김가은, 이수훈,
3차원 레이저 스캐너용 자동 초점 구동 장치의 광기계적 최적화
, 한국생산제조시스템학회 2013년도 추계학술대회
, pp.314
-314
(Oct, 2013)
[학술회의]
홍민성, 최용찬, 김종민, 이철수,
마이크로 무금형 점진성형의 가공조건에 관한 연구
, 2012 한국생산제조시스템학회 춘계학술대회
, Vol.1
, No.1
, pp.232
-232
(Apr, 2012)
[학술회의]
홍민성, 김종민, 최용찬, 이철수,
EDM 드릴에서 압력 모니터링 시스템을 이용한 마이크로홀 형상정밀도 향상을 위한 연구
, 2012 한국생산제조시스템학회 춘계학술대회
, Vol.1
, No.1
, pp.247
-247
(Apr, 2012)
[학술회의]
전용호, 최준명, 김태현, 김호상, 홍민성, 이문구,
마이크로 렌즈 어레이 정밀 가공물의 형상 및 표면 측정 및 평가 시스템 개발에 대한 연구
, 2012 한국생산제조시스템학회 춘계학술대회
, Vol.1
, No.1
, pp.242
-242
(Apr, 2012)
[학술회의]
홍민성, 이철수, 김종민,
스테인레스강판에서의 micro-EDM을 이용한 마이크로 홀의 가공 및 형상 특성에 관한 연구
, 2011 춘계학술대회
, Vol.1
, No.1
, pp.447
-448
(Apr, 2011)
[학술회의]
이문구, 유용환, 홍민성, 송준엽, 이수훈, 이정재, 이창우,
마이크로 부품 조립을 위한 평면 3-PRP 정렬기의 역기구학
, 한국공작기계학회 2010 추계학술대회
, Vol.1
, pp.28
-33
(Oct, 2010)
[학술회의]
홍민성, 김종민, Sharavsambuu Battseren,
Micro-EDM을 이용한 마이크로 채널 가공에 관한 연구
, 한국공작기계학회 2010 추계학술대회
, Vol.1
, No.1
, pp.466
-469
(Oct, 2010)
[학술회의]
홍민성, 조은희,
내구 해석기법을 이용한 차량용 연료탱크의 내구도 평가에 관한 연구
, 2009 추계학술대회
, Vol.1
, No.1
, pp.321
-326
(Oct, 2009)
[학술회의]
이문구, 유용환, 송준엽, 이창우, 이수훈, 홍민성,
마이크로 어셈블리용 6자유도 정렬기의 기구학적 분석 및 디자인
, 2008 추계 학술대회
, Vol.1
, No.1
, pp.34
-38
(Oct, 2008)
[학술회의]
이문구, 홍민성, 박준호, 이성민, 정현수, 이수훈, 강동우,
FPD 검사 시스템을 위한 정밀 스타일러스 포로파일러
, 대한기계학회 추계 학술대회
, Vol.1
, No.1
, pp.817
-822
(Nov, 2007)
[학술회의]
홍민성, 신대호, 김종민,
평면 보관 및 출하 시스템 개발에 관한 연구
, 2007년 춘계학술대회
, Vol.1
, No.1
, pp.449
-454
(May, 2007)
[학술회의]
홍민성, 정현수, 김종민,
마이크로가공의 가공물 재질에 따른 절삭 특성에 관한 연구
, 2007 춘계학술대회
, Vol.1
, No.1
, pp.850
-854
(May, 2007)
[학술회의]
홍민성, 박현기, 김종민,
미소 영역에서의 스냅 핏 잠금형상 개발에 관한 연구
, 2006 춘계학술대회
, Vol.1
, No.1
, pp.415
-420
(May, 2006)
[학술회의]
홍민성, 정현수, 김종민,
마이크로 채널에서의 표면거칠기와 유동성에 관한 연구
, 2006 춘계학술대회
, Vol.1
, No.1
, pp.379
-384
(May, 2006)
[학술회의]
홍민성, 박범수, 김종민,
Snap-fit의 계층적분류법에 대한 연구
, 한국 CAD/CAM 학회
, Vol.1
, No.1
, pp.806
-810
(Feb, 2006)
[학술회의]
홍민성, 박현기, 김종민,
Snap-fit 을 이용한 부품 체결의 단순화에 관한 연구
, 2006 한국 CAD/CAM 학회 학술발표회
, Vol.1
, No.1
, pp.795
-800
(Feb, 2006)
[학술회의]
홍민성, 박현기, 김종민,
Snap-fit을 이용한 부품 체결의 단순화에 관한 연구
, 2005 추계학술대회
, Vol.1
, No.1
, pp.349
-354
(Oct, 2005)
[학술회의]
홍민성, 김종민,
밀링가공시 절삭력의 시뮬레이션에 관한 연구
, 2003 춘계학술대회
, Vol.1
, No.1
, pp.184
-189
(Apr, 2003)
[학술회의]
홍민성, 김종민,
선반가공시 채터로 인한 표면형상의 시뮬레이션에 관한 연구
, 2002 추계학술대회
, Vol.1
, No.1
, pp.174
-179
(Oct, 2002)
[학술회의]
홍민성,
밀링작업에서 순간전단면에 기초한 절삭력모델에 관한 연구
, 2002 춘계학술대회
, Vol.1
, No.1
, pp.255
-260
(Apr, 2002)
[학술회의]
홍민성, 김종민,
선반가공시 발생하는 채터현상의 시뮬레이션에 관한 연구
, 2001년도 추계학술대회
, Vol.1
, No.1
, pp.19
-25
(Oct, 2001)
[학술회의]
홍민성, 염철만, 김동준,
A Study on the Effect of Tool Thermal Deformation on Surface Roughness for Turning Process
, 2000년 추계학술대회
, Vol.1
, pp.262
-267
(Oct, 2000)
[학술회의]
홍민성, 염철만,
The Optimal Selection of Cutting Parameters in Turning Operation
, 2000년 추계학술대회
, Vol.1
, pp.242
-248
(Oct, 2000)
[학술회의]
홍민성, 염철만, 김종민,
A Study on the Simulation Model of the Surface Roughness for Turning Process
, 2000년 추계학술대회
, Vol.1
, pp.230
-235
(Oct, 2000)
[학술회의]
홍민성, 한준현,
자유곡면의 정삭을 위한 표면가공 시스템
, 한국정밀공학회 춘계학술대회
, pp.287
-290
(May, 2000)
[학술회의]
홍민성, 염철만,
선반작업에서 실험계획법을 이용한 표면 거칠기에 관한 연구
, 2000년도 춘계학술대회
, pp.519
-524
(Apr, 2000)